News

Biodiesel & HVO Feedstock Demand in 2027: Which Oilseeds Win (2026)

KMEC soybean extraction plant

2027 Isn’t One Feedstock Race. It’s Two Markets Solving Different Problems with Different Oils.

The 2027 biodiesel feedstock and HVO story usually gets flattened into a single headline: soybean oil and canola oil competing for the same biofuel pie. The data doesn’t support that framing.

The US Renewable Fuel Standard (RFS) and the EU’s Renewable Energy Directive (RED III) run on different policy levers, different carbon-intensity accounting and different feedstock structures. Soybean oil and canola oil are central to each, but they win in different ways — and those differences translate straight into equipment specifications.

On the US side, the scale is hard to overstate. The EPA’s final 2026–2027 Renewable Volume Obligations push total biomass-based diesel feedstock demand from 34.2 billion pounds in 2025 to 53.8 billion pounds in 2026 and 62.0 billion pounds in 2027 — an 81% year-on-year jump in 2027. Soybean oil stays the largest domestic feedstock, with demand climbing from 12.4 billion pounds in 2025 to 18.4 billion in 2026 and 19.4 billion in 2027, assuming a 37.5% midpoint share for domestic biomass-based diesel production. Domestic feedstock use rises from 20.5 to 34.6 billion pounds, while imported feedstock use more than doubles to 27.4 billion pounds.

The EU side looks structurally different. Waste and residue feedstocks under Annex IX Parts A and B now make up roughly 53% of total feedstock volume — the first time waste-based inputs have exceeded crop-based inputs on aggregate. Within that mix, rapeseed oil remains the single largest feedstock at about 33%, while used cooking oil (UCO) sits at roughly 16.5%. HVO leans far more heavily on residues than FAME does: crop-based feedstocks account for only 9% of HVO feedstock input, with Annex IX Part A at 36%. The EU’s phase-down of palm- and soy-based biofuels — contributing 42.8% of targets in 2027 and dropping to zero by 2030 — opens a policy space canola can partially fill. But it fills that space on carbon intensity and price competitiveness, not on policy designation.

What this means for equipment buyers: the crushing and pretreatment priorities diverge. A plant chasing US RFS-driven soybean oil scale needs extraction capacity and pretreatment precision. A plant targeting Canadian or EU HVO-driven canola demand needs pre-press–extraction matching and HVO-grade deep degumming. The equipment lists overlap. The parameter windows and capacity ratios don’t.

1. US RFS: Soybean Oil’s Scale Expansion and Canola’s Structural Import Dependence

1.1 Where the 62 Billion Pounds Comes From

The feedstock math behind the 2027 RVO is straightforward. Domestic biomass-based diesel production is projected at 6.10 billion gallons in 2026 and 6.43 billion gallons in 2027, with imports adding another 1.30 billion gallons in 2027. Total supply reaches 7.74 billion gallons in 2027 — levels that require renewable diesel plants to run near full capacity and biodiesel facilities to sustain historically rare utilisation rates

Apply those volumes to feedstock consumption and you get the 62.0 billion pound total. Soybean oil’s 37.5% share assumption produces the 19.4 billion pound figure. That’s not a marginal adjustment. It absorbs a sizable share of available domestic soybean oil supply and carries “substantial implications for the soybean oil market and the broader fats and oils complex” .

1.2 US Soybean Crush Capacity Is Expanding — But It’s Policy-Sensitive

The US crushing sector is responding. Domestic crush capacity has grown by 25% over the past five years, with another 3.68 million tonnes of annual capacity scheduled across new Ohio and Wisconsin facilities by 2028. NOPA’s CEO notes the US will crush about 63% of all soybeans grown domestically in 2026, up from under 40% five years ago. ADM plans upgrades at four Midwest crush plants, adding 700,000 tonnes of annual capacity. CHS is investing USD 700 million in a Wisconsin plant capable of processing 80 million bushels annually, producing roughly 1 billion pounds of soybean oil.

But the expansion rides on policy support. The USD 0.14 per litre subsidy for renewable diesel from soybean oil — versus USD 0.05–0.06 per litre for canola oil — gives soy a distinct margin advantage. That advantage is a basis risk: if regulatory support shifts, crush economics shift with it.

1.3 Canola in the US: Import Dependence, Not Domestic Crush Expansion

Canola’s US story runs differently. Total US canola oil use is projected at 3.76 million tonnes against domestic crush capacity of only 2.09 million tonnes. The gap is filled by imported Canadian processed canola oil. Canada’s crush capacity has expanded to 15 million tonnes annually, absorbing roughly CAD 2 billion (USD 1.43 billion) in infrastructure investment. Active domestic crush volumes rose to 12.9 million tonnes in early 2026, targeting a record 13.7 million tonnes for 2026/27, while raw seed exports are projected to fall 14% to 7.7 million tonnes. Crush margins peaked near CAD 301.60 per tonne (USD 215.42 per tonne), heavily incentivising maximum throughput .

Equipment implication: The US soybean expansion is a soybean extraction plant market — scale replication and pretreatment precision (flake thickness consistency, dehulling optimisation for meal protein). The Canadian canola expansion is a canola oil plant market — pre-press–extraction capacity matching and HVO-grade oil pretreatment. Different equipment scopes, different capacity ratios.

2. EU HVO: Rapeseed Oil’s Policy Space, But Not an Automatic Win

2.1 Waste-Based Feedstocks Dominate, But Rapeseed Is Still the Largest Single Input

The EU feedstock mix has crossed a threshold. Waste and residue feedstocks at 53% now exceed crop-based inputs on aggregate . But “crop-based” isn’t a monolith. Rapeseed oil alone accounts for about 33% of total feedstock volume — larger than UCO’s 16.5% and larger than any other single stream. The phase-down of palm- and soy-based biofuels opens a policy space rapeseed can partially occupy, but it competes against waste streams with better carbon-intensity scores.

The carbon-intensity gap is real. UCO delivers a greenhouse gas reduction of roughly 84%, against about 47% for rapeseed oil, 50% for soybean oil and 45% for palm oil. HVO producers pick feedstocks on carbon intensity, price and product premium — not on policy designation. Rapeseed’s share reflects its marginal competitiveness against waste streams, not a guaranteed allocation.

2.2 HVO Pretreatment: Phosphorus Below 5 ppm Is the Entry Ticket

Rapeseed oil heading into an HVO hydrotreating unit must be deeply pretreated to protect the catalyst. The target is residual phosphorus below 5 ppm — a threshold described as “essential for subsequent catalytic hydrotreatment in the production of hydrotreated vegetable oil (HVO)”. Enzymatic degumming systems using phospholipase C and A1 have demonstrated the ability to push residual phosphorus below 5 ppm while cutting sulfur from 60–100 ppm to 9–27 ppm. Alfa Laval’s FAQ notes that phosphorus is typically reduced to a maximum of 3 ppm and metals to 5–10 ppm. Desmet’s degumming systems are designed around the same specification: strict residual phosphorus and metals limits to keep the HVO unit running smoothly.

For a canola oil plant serving HVO feedstock, the implication is that the degumming section’s depth and separation precision matter more than whether the oil is “refined” in the conventional sense. A line configured only for edible-oil degumming may meet food-grade specs but fail the HVO catalyst’s phosphorus limit. The purchase specification must state residual phosphorus as a key acceptance metric, alongside acid value and colour.

3. Equipment Configuration: Soybean and Canola Need Different Crushing and Pretreatment Logic in 2027

3.1 Soybean Extraction: Capacity Scale and Pretreatment Precision

US RFS-driven soybean oil demand requires soybean extraction plants to deliver both throughput and efficiency. Crush economics hinge on flake thickness consistency (affecting extraction rate and solvent consumption) and dehulling optimisation (reducing meal fibre, raising protein concentration). A line sized for 2027 feedstock demand needs a pretreatment section that holds flake thickness and conditioning temperature — not just a bigger extractor. The US capacity additions — CHS’s 80-million-bushel plant, ADM’s 700,000-tonne upgrades — are scale plays, but the margin edge comes from pretreatment precision as much as tonnage.

3.2 Canola Pre-Pressing: Matching Dehulling, Pre-Press and Extraction Capacity

Canola’s high oil content (roughly 40–45%) typically runs a pre-press–extraction route: pre-press drops cake residual oil to 15–20%, extraction brings it to 0.5–1%. Canada’s 15-million-tonne crush build-out requires pre-press compression ratios and screw geometry specified for canola’s fibre and oil profile — not borrowed from soybean or cottonseed parameters. Dehulling capacity should slightly exceed pre-press capacity to absorb hull-content variability.

3.3 HVO Pretreatment: Shared Logic, Different Specifications

Whether the feedstock is soybean oil or canola oil, the pretreatment target before the HVO unit is the same: phosphorus, metals and chlorides down to catalyst-tolerant thresholds. Myande’s HVO feedstock pretreatment covers 50–2,000 TPD, removing metal ions, chloride ions and phospholipids from vegetable oils, animal fats and UCO. For a canola-based HVO project, deep degumming + bleaching + separation is the standard path. For soybean, the logic is similar, but the degumming load and initial phosphorus level differ — equipment parameters must be set per feedstock, not forced into a single window.

The decision sequence: If the target market is US RFS-driven soybean oil, prioritise soybean extraction capacity and pretreatment precision. If the target is Canadian/EU HVO-driven canola, prioritise canola pre-press–extraction matching and HVO-grade deep degumming (residual P <5 ppm). The equipment lists overlap. The parameter windows and capacity ratios don’t. KMEC’s soybean extraction plant and canola oil plant configurations set pretreatment, pressing/extraction and oil treatment parameters per feedstock, rather than forcing both seeds through one fixed specification.

4. FAQ

Q1: What’s driving 2027 biodiesel and HVO feedstock demand?

The US EPA’s final 2026–2027 RVOs push total biomass-based diesel feedstock demand to 62.0 billion pounds in 2027, an 81% increase over 2025. In the EU, waste-based feedstocks already exceed 53% of the mix, while the phase-down of palm- and soy-based biofuels opens space for rapeseed oil and waste streams.

Q2: Are soybean oil and canola oil competing for the same feedstock pool in 2027?

Only partially. Soybean oil dominates the US RFS-driven domestic feedstock pool at 19.4 billion pounds in 2027. Canola oil is a structural import dependency in the US (3.76 million tonnes demand vs 2.09 million tonnes crush capacity) and the single largest feedstock in the EU mix at 33%. They win in different markets, not the same one.

Q3: Why hasn’t US canola demand led to a US crush capacity build-out?

Because the US is structurally short of canola crush capacity and relies on imported Canadian processed oil. Canada’s crush capacity has expanded to 15 million tonnes, with margins near CAD 300 per tonne, incentivising domestic processing over raw seed export]. The US imports the oil, not the seed.

Q4: What pretreatment does canola oil need before entering an HVO unit?

Deep degumming to bring residual phosphorus below 5 ppm, with metals and sulfur also controlled. Enzymatic degumming can achieve this while cutting sulfur from 60–100 ppm to 9–27 ppm. Equipment must be specified against the HVO catalyst’s phosphorus limit, not just edible-oil standards.

Q5: If I’m building a canola crush line for HVO feedstock, what equipment comes first?

Prioritise pre-press–extraction capacity matching (pre-press residual oil 15–20%, extraction 0.5–1%) and HVO-grade deep degumming. Dehulling capacity should exceed pre-press capacity to absorb hull variability. The degumming section’s phosphorus removal depth is the determining specification — not the refining line’s throughput alone.

Q6: How do US RFS and EU RED III priorities differ for equipment buyers?

US RFS prioritises soybean extraction scale and pretreatment precision — flake thickness, dehulling for meal protein, solvent efficiency. EU/Canadian HVO prioritises canola pre-press–extraction matching and deep degumming (P <5 ppm). The equipment lists overlap, but the parameter windows and capacity ratios are feedstock-specific.

To match equipment specifications to your feedstock and target market, talk to the KMEC engineering team.

References

  1. OPIS / Dow Jones, “Biomass-Based Diesel Feedstock Demand Projected to Climb 57% in 2026, 81% in 2027: Analysis,” June 25, 2026 — total feedstock use 34.2 billion lbs (2025) to 53.8 billion lbs (2026) and 62.0 billion lbs (2027); domestic feedstock 34.6 billion lbs in 2027; imported feedstock 27.4 billion lbs in 2027; soybean oil demand 12.4 billion lbs (2025) to 18.4 billion lbs (2026) and 19.4 billion lbs (2027) at 37.5% share; domestic biomass-based diesel production 6.10 billion gal (2026) and 6.43 billion gal (2027); imports 1.30 billion gal in 2027.
  2. farmdoc daily (16):110, “Rewriting the RFS Playbook: The Impact of Final RVOs on Projected Biomass-Based Diesel Feedstock Use for 2026-2027,” June 24, 2026 — feedstock requirement behind every gallon; soybean oil use rising from 12.4 to 18.4 and 19.4 billion lbs; domestic feedstock 34.6 billion lbs in 2027; imported feedstock 27.4 billion lbs in 2027.
  3. CropGPT, “Canada – Canola: Domestic Crushing Capacity Expansion and Feedstock Competition,” November 6, 2026 — Canadian crush capacity expanded to 15 million tonnes; CAD 2 billion (USD 1.43 billion) infrastructure investment; active crush 12.9 million tonnes in early 2026, record 13.7 million tonnes for 2026/27; raw seed exports down 14% to 7.7 million tonnes; crush margins peaked near CAD 301.60 per tonne (USD 215.42 per tonne).
  4. PRM Elements, “Europe’s Biodiesel Feedstock Mix: EBB Report Insights,” June 25, 2026 — waste and residue feedstocks (Annex IX Parts A and B) approximately 53% of total feedstock volume; rapeseed oil remains the single largest feedstock at about 33%; UCO approximately 16.5%; HVO crop-based share only 9%, Annex IX Part A 36%.
  5. Science.LP.EDU.UA, “Enzymatic Degumming of Soybean, Rapeseed, and Sunflower Oils from Ukrainian Crops Using Purifine Enzymes,” 2026 — primary objective residual phosphorus content <5 ppm, essential for catalytic hydrotreatment in HVO production; sulfur reduction from 60–100 ppm to 9–27 ppm.
  6. CropGPT, “United States – Soybeans: Yield Forecast Increase and Processing Capacity Expansion,” November 6, 2026 — domestic crushing capacity expanded by 25% over the past five years; additional 3.68 million tonnes annual capacity scheduled by 2028; federal biomass-based biofuel blending requirements for 2026–2027 set 67% higher than 2025; USD 0.14/litre subsidy for renewable diesel from soybean oil vs USD 0.05–0.06 for canola oil.
  7. Brownfield Ag News, “Soy crush back on track and expected to expand,” October 22, 2026 — US will crush about 63% of all soybeans grown domestically in 2026, up from under 40% five years ago; new crush plants coming online in Ohio, Wisconsin, and Louisiana.
  8. Agri-Pulse / NOPA, “CHS invests $700M to build major soy crush plant in Wisconsin,” September 14, 2026 — facility to process 80 million bushels annually, producing roughly 1 billion pounds of soybean oil; completion expected fall 2028.
  9. Alfa Laval, HVO Pretreatment FAQs — phosphorus typically reduced to max 3 ppm, metals to 5–10 ppm.
  10. Myande, HVO Feedstock Pretreatment — capacity range 50–2,000 TPD; removal of metal ions, chloride ions, phospholipids and impurities from vegetable oil, animal fat and UCO.
  11. European Commission, RED III phase-down schedule for palm- and soy-based biofuels — contribution to renewable energy targets: 71.4% in 2025, 42.8% in 2027, 14.3% in 2029, zero from 2030.
  12. HTFC / 华泰期货, UCO carbon intensity reference — UCO GHG reduction 84%, rapeseed oil 47%, soybean oil 50%, palm oil 45%.

If you have any questions or just want to say hello, please don’t hesitate to contact us. We’ll get back to you soon.

  • Email:info@oilmillequipment.com
  • TEL: 0086 372 5388851 (China)
  • Address: Suite 5, 12/F, Xinshe Bld., Wenfeng Rd. Anyang, Henan, P.R.C.
    PC:455000